| 1 | Linux version 2.6.20-gentoo-r6 (root@server) (gcc version 4.1.1 (Gentoo 4.1.1-r3)) #2 SMP Fri Apr 20 23:40:27 CDT 2007
|
|---|
| 2 | Command line: root=/dev/md3 vga=0x318 video=vesafb:mtrr:3,ywrap
|
|---|
| 3 | BIOS-provided physical RAM map:
|
|---|
| 4 | BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
|
|---|
| 5 | BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
|
|---|
| 6 | BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
|
|---|
| 7 | BIOS-e820: 0000000000100000 - 000000001ff30000 (usable)
|
|---|
| 8 | BIOS-e820: 000000001ff30000 - 000000001ff40000 (ACPI data)
|
|---|
| 9 | BIOS-e820: 000000001ff40000 - 000000001fff0000 (ACPI NVS)
|
|---|
| 10 | BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved)
|
|---|
| 11 | BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
|
|---|
| 12 | Entering add_active_range(0, 0, 159) 0 entries of 3200 used
|
|---|
| 13 | Entering add_active_range(0, 256, 130864) 1 entries of 3200 used
|
|---|
| 14 | end_pfn_map = 1048576
|
|---|
| 15 | DMI 2.3 present.
|
|---|
| 16 | ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000fa850
|
|---|
| 17 | ACPI: XSDT (v001 A M I OEMXSDT 0x06000517 MSFT 0x00000097) @ 0x000000001ff30100
|
|---|
| 18 | ACPI: FADT (v003 A M I OEMFACP 0x06000517 MSFT 0x00000097) @ 0x000000001ff30290
|
|---|
| 19 | ACPI: MADT (v001 A M I OEMAPIC 0x06000517 MSFT 0x00000097) @ 0x000000001ff30390
|
|---|
| 20 | ACPI: OEMB (v001 A M I OEMBIOS 0x06000517 MSFT 0x00000097) @ 0x000000001ff40040
|
|---|
| 21 | ACPI: DSDT (v001 SK8V_ SK8V_033 0x00000033 MSFT 0x0100000d) @ 0x0000000000000000
|
|---|
| 22 | Scanning NUMA topology in Northbridge 24
|
|---|
| 23 | Number of nodes 1
|
|---|
| 24 | Node 0 MemBase 0000000000000000 Limit 000000001ff30000
|
|---|
| 25 | Entering add_active_range(0, 0, 159) 0 entries of 3200 used
|
|---|
| 26 | Entering add_active_range(0, 256, 130864) 1 entries of 3200 used
|
|---|
| 27 | NUMA: Using 63 for the hash shift.
|
|---|
| 28 | Using node hash shift of 63
|
|---|
| 29 | Bootmem setup node 0 0000000000000000-000000001ff30000
|
|---|
| 30 | Zone PFN ranges:
|
|---|
| 31 | DMA 0 -> 4096
|
|---|
| 32 | DMA32 4096 -> 1048576
|
|---|
| 33 | Normal 1048576 -> 1048576
|
|---|
| 34 | early_node_map[2] active PFN ranges
|
|---|
| 35 | 0: 0 -> 159
|
|---|
| 36 | 0: 256 -> 130864
|
|---|
| 37 | On node 0 totalpages: 130767
|
|---|
| 38 | DMA zone: 56 pages used for memmap
|
|---|
| 39 | DMA zone: 1786 pages reserved
|
|---|
| 40 | DMA zone: 2157 pages, LIFO batch:0
|
|---|
| 41 | DMA32 zone: 1733 pages used for memmap
|
|---|
| 42 | DMA32 zone: 125035 pages, LIFO batch:31
|
|---|
| 43 | Normal zone: 0 pages used for memmap
|
|---|
| 44 | ACPI: PM-Timer IO Port: 0x808
|
|---|
| 45 | ACPI: Local APIC address 0xfee00000
|
|---|
| 46 | ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
|
|---|
| 47 | Processor #0 (Bootup-CPU)
|
|---|
| 48 | ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
|
|---|
| 49 | ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
|
|---|
| 50 | IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
|
|---|
| 51 | ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
|
|---|
| 52 | ACPI: IRQ0 used by override.
|
|---|
| 53 | ACPI: IRQ2 used by override.
|
|---|
| 54 | ACPI: IRQ9 used by override.
|
|---|
| 55 | Setting APIC routing to flat
|
|---|
| 56 | Using ACPI (MADT) for SMP configuration information
|
|---|
| 57 | Nosave address range: 000000000009f000 - 00000000000a0000
|
|---|
| 58 | Nosave address range: 00000000000a0000 - 00000000000e4000
|
|---|
| 59 | Nosave address range: 00000000000e4000 - 0000000000100000
|
|---|
| 60 | Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
|
|---|
| 61 | PERCPU: Allocating 33280 bytes of per cpu data
|
|---|
| 62 | Built 1 zonelists. Total pages: 127192
|
|---|
| 63 | Kernel command line: root=/dev/md3 vga=0x318 video=vesafb:mtrr:3,ywrap
|
|---|
| 64 | Initializing CPU#0
|
|---|
| 65 | PID hash table entries: 2048 (order: 11, 16384 bytes)
|
|---|
| 66 | Console: colour dummy device 80x25
|
|---|
| 67 | Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
|
|---|
| 68 | Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
|
|---|
| 69 | Checking aperture...
|
|---|
| 70 | CPU 0: aperture @ e8000000 size 128 MB
|
|---|
| 71 | Memory: 507904k/523456k available (3986k kernel code, 15164k reserved, 1996k data, 368k init)
|
|---|
| 72 | Calibrating delay using timer specific routine.. 3609.00 BogoMIPS (lpj=7218001)
|
|---|
| 73 | Mount-cache hash table entries: 256
|
|---|
| 74 | CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
|
|---|
| 75 | CPU: L2 Cache: 1024K (64 bytes/line)
|
|---|
| 76 | CPU 0/0 -> Node 0
|
|---|
| 77 | SMP alternatives: switching to UP code
|
|---|
| 78 | Freeing SMP alternatives: 40k freed
|
|---|
| 79 | ACPI: Core revision 20060707
|
|---|
| 80 | Using local APIC timer interrupts.
|
|---|
| 81 | result 12516464
|
|---|
| 82 | Detected 12.516 MHz APIC timer.
|
|---|
| 83 | Brought up 1 CPUs
|
|---|
| 84 | testing NMI watchdog ... OK.
|
|---|
| 85 | time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
|
|---|
| 86 | time.c: Detected 1802.370 MHz processor.
|
|---|
| 87 | NET: Registered protocol family 16
|
|---|
| 88 | ACPI: bus type pci registered
|
|---|
| 89 | PCI: Using configuration type 1
|
|---|
| 90 | ACPI: Interpreter enabled
|
|---|
| 91 | ACPI: Using IOAPIC for interrupt routing
|
|---|
| 92 | ACPI: PCI Root Bridge [PCI0] (0000:00)
|
|---|
| 93 | PCI: Probing PCI hardware (bus 00)
|
|---|
| 94 | 0000:00:0f.1: cannot adjust BAR0 (not I/O)
|
|---|
| 95 | 0000:00:0f.1: cannot adjust BAR1 (not I/O)
|
|---|
| 96 | 0000:00:0f.1: cannot adjust BAR2 (not I/O)
|
|---|
| 97 | 0000:00:0f.1: cannot adjust BAR3 (not I/O)
|
|---|
| 98 | PCI: enabled onboard AC97/MC97 devices
|
|---|
| 99 | Boot video device is 0000:01:00.0
|
|---|
| 100 | ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
|
|---|
| 101 | ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
|
|---|
| 102 | ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)
|
|---|
| 103 | ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
|
|---|
| 104 | ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
|
|---|
| 105 | ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
|
|---|
| 106 | ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
|
|---|
| 107 | ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
|
|---|
| 108 | ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
|
|---|
| 109 | SCSI subsystem initialized
|
|---|
| 110 | libata version 2.00 loaded.
|
|---|
| 111 | usbcore: registered new interface driver usbfs
|
|---|
| 112 | usbcore: registered new interface driver hub
|
|---|
| 113 | usbcore: registered new device driver usb
|
|---|
| 114 | PCI: Using ACPI for IRQ routing
|
|---|
| 115 | PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
|
|---|
| 116 | PCI: Cannot allocate resource region 0 of device 0000:00:00.0
|
|---|
| 117 | agpgart: Detected AGP bridge 0
|
|---|
| 118 | agpgart: AGP aperture is 128M @ 0xe8000000
|
|---|
| 119 | ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16
|
|---|
| 120 | ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[fdb00000-fdb007ff] Max Packet=[2048] IR/IT contexts=[4/8]
|
|---|
| 121 | PCI: Bridge: 0000:00:01.0
|
|---|
| 122 | IO window: disabled.
|
|---|
| 123 | MEM window: f5300000-f74fffff
|
|---|
| 124 | PREFETCH window: d5200000-e51fffff
|
|---|
| 125 | PCI: Setting latency timer of device 0000:00:01.0 to 64
|
|---|
| 126 | NET: Registered protocol family 2
|
|---|
| 127 | IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
|
|---|
| 128 | TCP established hash table entries: 16384 (order: 6, 262144 bytes)
|
|---|
| 129 | TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
|
|---|
| 130 | TCP: Hash tables configured (established 16384 bind 8192)
|
|---|
| 131 | TCP reno registered
|
|---|
| 132 | Total HugeTLB memory allocated, 0
|
|---|
| 133 | Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
|
|---|
| 134 | NTFS driver 2.1.28 [Flags: R/O].
|
|---|
| 135 | SGI XFS with large block/inode numbers, no debug enabled
|
|---|
| 136 | io scheduler noop registered
|
|---|
| 137 | io scheduler deadline registered
|
|---|
| 138 | io scheduler cfq registered (default)
|
|---|
| 139 | Real Time Clock Driver v1.12ac
|
|---|
| 140 | Linux agpgart interface v0.101 (c) Dave Jones
|
|---|
| 141 | vesafb: framebuffer at 0xd8000000, mapped to 0xffffc20000100000, using 6144k, total 131072k
|
|---|
| 142 | vesafb: mode is 1024x768x32, linelength=4096, pages=1
|
|---|
| 143 | vesafb: scrolling: redraw
|
|---|
| 144 | vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
|
|---|
| 145 | Console: switching to colour frame buffer device 128x48
|
|---|
| 146 | fb0: VESA VGA frame buffer device
|
|---|
| 147 | input: Power Button (FF) as /class/input/input0
|
|---|
| 148 | ACPI: Power Button (FF) [PWRF]
|
|---|
| 149 | input: Power Button (CM) as /class/input/input1
|
|---|
| 150 | ACPI: Power Button (CM) [PWRB]
|
|---|
| 151 | input: Sleep Button (CM) as /class/input/input2
|
|---|
| 152 | ACPI: Sleep Button (CM) [SLPB]
|
|---|
| 153 | Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
|
|---|
| 154 | serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
|
|---|
| 155 | serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
|
|---|
| 156 | Floppy drive(s): fd0 is 1.44M
|
|---|
| 157 | FDC 0 is a post-1991 82077
|
|---|
| 158 | RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
|
|---|
| 159 | loop: loaded (max 8 devices)
|
|---|
| 160 | ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 17
|
|---|
| 161 | skge 1.9 addr 0xfde00000 irq 17 chip Yukon rev 1
|
|---|
| 162 | skge eth0: addr 00:11:2f:4f:51:71
|
|---|
| 163 | tun: Universal TUN/TAP device driver, 1.6
|
|---|
| 164 | tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
|
|---|
| 165 | netconsole: not configured, aborting
|
|---|
| 166 | Linux video capture interface: v2.00
|
|---|
| 167 | Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
|
|---|
| 168 | ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
|
|---|
| 169 | VP_IDE: IDE controller at PCI slot 0000:00:0f.1
|
|---|
| 170 | ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20
|
|---|
| 171 | VP_IDE: chipset revision 6
|
|---|
| 172 | VP_IDE: not 100% native mode: will probe irqs later
|
|---|
| 173 | VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
|
|---|
| 174 | ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
|
|---|
| 175 | ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio
|
|---|
| 176 | Probing IDE interface ide0...
|
|---|
| 177 | hda: TOSHIBA DVD-ROM SD-M1912, ATAPI CD/DVD-ROM drive
|
|---|
| 178 | ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e01800008bb839]
|
|---|
| 179 | ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
|
|---|
| 180 | Probing IDE interface ide1...
|
|---|
| 181 | Probing IDE interface ide1...
|
|---|
| 182 | hda: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
|
|---|
| 183 | Uniform CD-ROM driver Revision: 3.20
|
|---|
| 184 | megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
|
|---|
| 185 | megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006)
|
|---|
| 186 | megasas: 00.00.03.05 Mon Oct 02 11:21:32 PDT 2006
|
|---|
| 187 | sata_promise 0000:00:08.0: version 1.05
|
|---|
| 188 | ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 18 (level, low) -> IRQ 18
|
|---|
| 189 | sata_promise PATA port found
|
|---|
| 190 | Losing some ticks... checking if CPU frequency changed.
|
|---|
| 191 | ata1: SATA max UDMA/133 cmd 0xFFFFC2000004A200 ctl 0xFFFFC2000004A238 bmdma 0x0 irq 18
|
|---|
| 192 | ata2: SATA max UDMA/133 cmd 0xFFFFC2000004A280 ctl 0xFFFFC2000004A2B8 bmdma 0x0 irq 18
|
|---|
| 193 | ata3: PATA max UDMA/133 cmd 0xFFFFC2000004A300 ctl 0xFFFFC2000004A338 bmdma 0x0 irq 18
|
|---|
| 194 | scsi0 : sata_promise
|
|---|
| 195 | ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
|
|---|
| 196 | ata1.00: ATA-7, max UDMA/133, 781422768 sectors: LBA48 NCQ (depth 0/32)
|
|---|
| 197 | ata1.00: ata1: dev 0 multi count 0
|
|---|
| 198 | ata1.00: configured for UDMA/133
|
|---|
| 199 | scsi1 : sata_promise
|
|---|
| 200 | ata2: SATA link down (SStatus 0 SControl 300)
|
|---|
| 201 | scsi2 : sata_promise
|
|---|
| 202 | scsi 0:0:0:0: Direct-Access ATA WDC WD4000KD-00N 01.0 PQ: 0 ANSI: 5
|
|---|
| 203 | SCSI device sda: 781422768 512-byte hdwr sectors (400088 MB)
|
|---|
| 204 | sda: Write Protect is off
|
|---|
| 205 | sda: Mode Sense: 00 3a 00 00
|
|---|
| 206 | SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
|
|---|
| 207 | SCSI device sda: 781422768 512-byte hdwr sectors (400088 MB)
|
|---|
| 208 | sda: Write Protect is off
|
|---|
| 209 | sda: Mode Sense: 00 3a 00 00
|
|---|
| 210 | SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
|
|---|
| 211 | sda: sda1 sda2
|
|---|
| 212 | sd 0:0:0:0: Attached scsi disk sda
|
|---|
| 213 | sd 0:0:0:0: Attached scsi generic sg0 type 0
|
|---|
| 214 | sata_via 0000:00:0f.0: version 2.0
|
|---|
| 215 | ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20
|
|---|
| 216 | sata_via 0000:00:0f.0: routed to hard irq line 10
|
|---|
| 217 | ata4: SATA max UDMA/133 cmd 0xE800 ctl 0xE402 bmdma 0xD400 irq 20
|
|---|
| 218 | ata5: SATA max UDMA/133 cmd 0xE000 ctl 0xD802 bmdma 0xD408 irq 20
|
|---|
| 219 | scsi3 : sata_via
|
|---|
| 220 | ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
|
|---|
| 221 | ATA: abnormal status 0x7F on port 0xE807
|
|---|
| 222 | ATA: abnormal status 0x7F on port 0xE807
|
|---|
| 223 | ata4.00: ATA-6, max UDMA/133, 72303840 sectors: LBA48
|
|---|
| 224 | ata4.00: ata4: dev 0 multi count 16
|
|---|
| 225 | ata4.00: applying bridge limits
|
|---|
| 226 | ata4.00: configured for UDMA/100
|
|---|
| 227 | scsi4 : sata_via
|
|---|
| 228 | ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
|
|---|
| 229 | ATA: abnormal status 0x7F on port 0xE007
|
|---|
| 230 | ATA: abnormal status 0x7F on port 0xE007
|
|---|
| 231 | ata5.00: ATA-6, max UDMA/133, 72303840 sectors: LBA48
|
|---|
| 232 | ata5.00: ata5: dev 0 multi count 16
|
|---|
| 233 | ata5.00: applying bridge limits
|
|---|
| 234 | ata5.00: configured for UDMA/100
|
|---|
| 235 | scsi 3:0:0:0: Direct-Access ATA WDC WD360GD-00FN 35.0 PQ: 0 ANSI: 5
|
|---|
| 236 | SCSI device sdb: 72303840 512-byte hdwr sectors (37020 MB)
|
|---|
| 237 | sdb: Write Protect is off
|
|---|
| 238 | sdb: Mode Sense: 00 3a 00 00
|
|---|
| 239 | SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
|
|---|
| 240 | SCSI device sdb: 72303840 512-byte hdwr sectors (37020 MB)
|
|---|
| 241 | sdb: Write Protect is off
|
|---|
| 242 | sdb: Mode Sense: 00 3a 00 00
|
|---|
| 243 | SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
|
|---|
| 244 | sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 >
|
|---|
| 245 | sd 3:0:0:0: Attached scsi disk sdb
|
|---|
| 246 | sd 3:0:0:0: Attached scsi generic sg1 type 0
|
|---|
| 247 | scsi 4:0:0:0: Direct-Access ATA WDC WD360GD-00FN 35.0 PQ: 0 ANSI: 5
|
|---|
| 248 | SCSI device sdc: 72303840 512-byte hdwr sectors (37020 MB)
|
|---|
| 249 | sdc: Write Protect is off
|
|---|
| 250 | sdc: Mode Sense: 00 3a 00 00
|
|---|
| 251 | SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
|
|---|
| 252 | SCSI device sdc: 72303840 512-byte hdwr sectors (37020 MB)
|
|---|
| 253 | sdc: Write Protect is off
|
|---|
| 254 | sdc: Mode Sense: 00 3a 00 00
|
|---|
| 255 | SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
|
|---|
| 256 | sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 >
|
|---|
| 257 | sd 4:0:0:0: Attached scsi disk sdc
|
|---|
| 258 | sd 4:0:0:0: Attached scsi generic sg2 type 0
|
|---|
| 259 | Fusion MPT base driver 3.04.03
|
|---|
| 260 | Copyright (c) 1999-2007 LSI Logic Corporation
|
|---|
| 261 | Fusion MPT SPI Host driver 3.04.03
|
|---|
| 262 | Fusion MPT SAS Host driver 3.04.03
|
|---|
| 263 | ieee1394: raw1394: /dev/raw1394 device initialized
|
|---|
| 264 | ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21
|
|---|
| 265 | ehci_hcd 0000:00:10.4: EHCI Host Controller
|
|---|
| 266 | ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
|
|---|
| 267 | ehci_hcd 0000:00:10.4: irq 21, io mem 0xfdf00000
|
|---|
| 268 | ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
|
|---|
| 269 | usb usb1: configuration #1 chosen from 1 choice
|
|---|
| 270 | hub 1-0:1.0: USB hub found
|
|---|
| 271 | hub 1-0:1.0: 8 ports detected
|
|---|
| 272 | ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
|
|---|
| 273 | USB Universal Host Controller Interface driver v3.0
|
|---|
| 274 | ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
|
|---|
| 275 | uhci_hcd 0000:00:10.0: UHCI Host Controller
|
|---|
| 276 | uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
|
|---|
| 277 | uhci_hcd 0000:00:10.0: irq 21, io base 0x0000b400
|
|---|
| 278 | usb usb2: configuration #1 chosen from 1 choice
|
|---|
| 279 | hub 2-0:1.0: USB hub found
|
|---|
| 280 | hub 2-0:1.0: 2 ports detected
|
|---|
| 281 | ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21
|
|---|
| 282 | uhci_hcd 0000:00:10.1: UHCI Host Controller
|
|---|
| 283 | uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
|
|---|
| 284 | uhci_hcd 0000:00:10.1: irq 21, io base 0x0000b800
|
|---|
| 285 | usb usb3: configuration #1 chosen from 1 choice
|
|---|
| 286 | hub 3-0:1.0: USB hub found
|
|---|
| 287 | hub 3-0:1.0: 2 ports detected
|
|---|
| 288 | ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21
|
|---|
| 289 | uhci_hcd 0000:00:10.2: UHCI Host Controller
|
|---|
| 290 | uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
|
|---|
| 291 | uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c000
|
|---|
| 292 | usb usb4: configuration #1 chosen from 1 choice
|
|---|
| 293 | hub 4-0:1.0: USB hub found
|
|---|
| 294 | hub 4-0:1.0: 2 ports detected
|
|---|
| 295 | ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21
|
|---|
| 296 | uhci_hcd 0000:00:10.3: UHCI Host Controller
|
|---|
| 297 | uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
|
|---|
| 298 | uhci_hcd 0000:00:10.3: irq 21, io base 0x0000c400
|
|---|
| 299 | usb usb5: configuration #1 chosen from 1 choice
|
|---|
| 300 | hub 5-0:1.0: USB hub found
|
|---|
| 301 | hub 5-0:1.0: 2 ports detected
|
|---|
| 302 | usb 4-2: new low speed USB device using uhci_hcd and address 2
|
|---|
| 303 | usb 4-2: configuration #1 chosen from 1 choice
|
|---|
| 304 | usbcore: registered new interface driver usblp
|
|---|
| 305 | drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
|
|---|
| 306 | Initializing USB Mass Storage driver...
|
|---|
| 307 | usbcore: registered new interface driver usb-storage
|
|---|
| 308 | USB Mass Storage support registered.
|
|---|
| 309 | input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /class/input/input3
|
|---|
| 310 | input: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:10.2-2
|
|---|
| 311 | usbcore: registered new interface driver usbhid
|
|---|
| 312 | drivers/usb/input/hid-core.c: v2.6:USB HID core driver
|
|---|
| 313 | serio: i8042 KBD port at 0x60,0x64 irq 1
|
|---|
| 314 | serio: i8042 AUX port at 0x60,0x64 irq 12
|
|---|
| 315 | mice: PS/2 mouse device common for all mice
|
|---|
| 316 | input: AT Translated Set 2 keyboard as /class/input/input4
|
|---|
| 317 | md: raid1 personality registered for level 1
|
|---|
| 318 | md: multipath personality registered for level -4
|
|---|
| 319 | device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
|
|---|
| 320 | Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09 09:56:17 2007 UTC).
|
|---|
| 321 | ALSA device list:
|
|---|
| 322 | No soundcards found.
|
|---|
| 323 | oprofile: using NMI interrupt.
|
|---|
| 324 | Netfilter messages via NETLINK v0.30.
|
|---|
| 325 | nf_conntrack version 0.5.0 (2044 buckets, 16352 max)
|
|---|
| 326 | ip_tables: (C) 2000-2006 Netfilter Core Team
|
|---|
| 327 | arp_tables: (C) 2002 David S. Miller
|
|---|
| 328 | TCP cubic registered
|
|---|
| 329 | NET: Registered protocol family 1
|
|---|
| 330 | NET: Registered protocol family 10
|
|---|
| 331 | IPv6 over IPv4 tunneling driver
|
|---|
| 332 | NET: Registered protocol family 17
|
|---|
| 333 | Bridge firewalling registered
|
|---|
| 334 | powernow-k8: Found 1 AMD Opteron(tm) Processor 144 processors (version 2.00.00)
|
|---|
| 335 | powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x2
|
|---|
| 336 | powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0xe
|
|---|
| 337 | md: Autodetecting RAID arrays.
|
|---|
| 338 | md: autorun ...
|
|---|
| 339 | md: considering sdc5 ...
|
|---|
| 340 | md: adding sdc5 ...
|
|---|
| 341 | md: sdc3 has different UUID to sdc5
|
|---|
| 342 | md: sdc2 has different UUID to sdc5
|
|---|
| 343 | md: sdc1 has different UUID to sdc5
|
|---|
| 344 | md: adding sdb5 ...
|
|---|
| 345 | md: sdb3 has different UUID to sdc5
|
|---|
| 346 | md: sdb2 has different UUID to sdc5
|
|---|
| 347 | md: sdb1 has different UUID to sdc5
|
|---|
| 348 | md: created md3
|
|---|
| 349 | md: bind<sdb5>
|
|---|
| 350 | md: bind<sdc5>
|
|---|
| 351 | md: running: <sdc5><sdb5>
|
|---|
| 352 | raid1: raid set md3 active with 2 out of 2 mirrors
|
|---|
| 353 | md3: bitmap initialized from disk: read 8/8 pages, set 26 bits, status: 0
|
|---|
| 354 | created bitmap (127 pages) for device md3
|
|---|
| 355 | md: considering sdc3 ...
|
|---|
| 356 | md: adding sdc3 ...
|
|---|
| 357 | md: sdc2 has different UUID to sdc3
|
|---|
| 358 | md: sdc1 has different UUID to sdc3
|
|---|
| 359 | md: adding sdb3 ...
|
|---|
| 360 | md: sdb2 has different UUID to sdc3
|
|---|
| 361 | md: sdb1 has different UUID to sdc3
|
|---|
| 362 | md: created md2
|
|---|
| 363 | md: bind<sdb3>
|
|---|
| 364 | md: bind<sdc3>
|
|---|
| 365 | md: running: <sdc3><sdb3>
|
|---|
| 366 | raid1: raid set md2 active with 2 out of 2 mirrors
|
|---|
| 367 | md2: bitmap initialized from disk: read 15/15 pages, set 0 bits, status: 0
|
|---|
| 368 | created bitmap (239 pages) for device md2
|
|---|
| 369 | md: considering sdc2 ...
|
|---|
| 370 | md: adding sdc2 ...
|
|---|
| 371 | md: sdc1 has different UUID to sdc2
|
|---|
| 372 | md: adding sdb2 ...
|
|---|
| 373 | md: sdb1 has different UUID to sdc2
|
|---|
| 374 | md: created md1
|
|---|
| 375 | md: bind<sdb2>
|
|---|
| 376 | md: bind<sdc2>
|
|---|
| 377 | md: running: <sdc2><sdb2>
|
|---|
| 378 | raid1: raid set md1 active with 2 out of 2 mirrors
|
|---|
| 379 | md1: bitmap initialized from disk: read 8/8 pages, set 0 bits, status: 0
|
|---|
| 380 | created bitmap (120 pages) for device md1
|
|---|
| 381 | md: considering sdc1 ...
|
|---|
| 382 | md: adding sdc1 ...
|
|---|
| 383 | md: adding sdb1 ...
|
|---|
| 384 | md: created md0
|
|---|
| 385 | md: bind<sdb1>
|
|---|
| 386 | md: bind<sdc1>
|
|---|
| 387 | md: running: <sdc1><sdb1>
|
|---|
| 388 | raid1: raid set md0 active with 2 out of 2 mirrors
|
|---|
| 389 | md0: bitmap initialized from disk: read 1/1 pages, set 0 bits, status: 0
|
|---|
| 390 | created bitmap (8 pages) for device md0
|
|---|
| 391 | md: ... autorun DONE.
|
|---|
| 392 | ReiserFS: md3: found reiserfs format "3.6" with standard journal
|
|---|
| 393 | ReiserFS: md3: using ordered data mode
|
|---|
| 394 | ReiserFS: md3: journal params: device md3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
|
|---|
| 395 | ReiserFS: md3: checking transaction log (md3)
|
|---|
| 396 | ReiserFS: md3: Using r5 hash to sort names
|
|---|
| 397 | VFS: Mounted root (reiserfs filesystem) readonly.
|
|---|
| 398 | Freeing unused kernel memory: 368k freed
|
|---|
| 399 | cx2388x alsa driver version 0.0.6 loaded
|
|---|
| 400 | ACPI: PCI Interrupt 0000:00:0d.1[A] -> GSI 18 (level, low) -> IRQ 18
|
|---|
| 401 | CORE cx88[0]: subsystem: 18ac:d500, board: DViCO FusionHDTV 5 Gold [card=31,autodetected]
|
|---|
| 402 | TV tuner 64 at 0x1fe, Radio tuner -1 at 0x1fe
|
|---|
| 403 | cx2388x v4l2 driver version 0.0.6 loaded
|
|---|
| 404 | cx2388x cx88-mpeg Driver Manager version 0.0.6 loaded
|
|---|
| 405 | cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
|
|---|
| 406 | ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 18 (level, low) -> IRQ 18
|
|---|
| 407 | cx88[0]/0: found at 0000:00:0d.0, rev: 5, irq: 18, latency: 64, mmio: 0xfa000000
|
|---|
| 408 | tuner 0-0043: chip found @ 0x86 (cx88[0])
|
|---|
| 409 | tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner)
|
|---|
| 410 | tuner 0-0061: chip found @ 0xc2 (cx88[0])
|
|---|
| 411 | tuner 0-0061: type set to 64 (LG TDVS-H06xF)
|
|---|
| 412 | tuner 0-0061: type set to 64 (LG TDVS-H06xF)
|
|---|
| 413 | cx88[0]/0: registered device video0 [v4l2]
|
|---|
| 414 | cx88[0]/0: registered device vbi0
|
|---|
| 415 | cx88[0]/2: cx2388x 8802 Driver Manager
|
|---|
| 416 | ACPI: PCI Interrupt 0000:00:0d.2[A] -> GSI 18 (level, low) -> IRQ 18
|
|---|
| 417 | cx88[0]/2: found at 0000:00:0d.2, rev: 5, irq: 18, latency: 64, mmio: 0xfc000000
|
|---|
| 418 | ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22
|
|---|
| 419 | PCI: Setting latency timer of device 0000:00:11.5 to 64
|
|---|
| 420 | codec_read: codec 0 is not valid [0xfe0000]
|
|---|
| 421 | codec_read: codec 0 is not valid [0xfe0000]
|
|---|
| 422 | codec_read: codec 0 is not valid [0xfe0000]
|
|---|
| 423 | codec_read: codec 0 is not valid [0xfe0000]
|
|---|
| 424 | nvidia: module license 'NVIDIA' taints kernel.
|
|---|
| 425 | ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
|
|---|
| 426 | NVRM: loading NVIDIA UNIX x86_64 Kernel Module 1.0-9755 Mon Feb 26 23:16:31 PST 2007
|
|---|
| 427 | cx2388x dvb driver version 0.0.6 loaded
|
|---|
| 428 | cx8802_register_driver() ->registering driver type=dvb access=shared
|
|---|
| 429 | CORE cx88[0]: subsystem: 18ac:d500, board: DViCO FusionHDTV 5 Gold [card=31]
|
|---|
| 430 | cx88[0]/2: cx2388x based dvb card
|
|---|
| 431 | DVB: registering new adapter (cx88[0]).
|
|---|
| 432 | DVB: registering frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend)...
|
|---|
| 433 | ReiserFS: md2: found reiserfs format "3.6" with standard journal
|
|---|
| 434 | ReiserFS: md2: using ordered data mode
|
|---|
| 435 | ReiserFS: md2: journal params: device md2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
|
|---|
| 436 | ReiserFS: md2: checking transaction log (md2)
|
|---|
| 437 | ReiserFS: md2: Using r5 hash to sort names
|
|---|
| 438 | ReiserFS: sda2: found reiserfs format "3.6" with standard journal
|
|---|
| 439 | ReiserFS: sda2: using ordered data mode
|
|---|
| 440 | ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
|
|---|
| 441 | ReiserFS: sda2: checking transaction log (sda2)
|
|---|
| 442 | ReiserFS: sda2: Using r5 hash to sort names
|
|---|
| 443 | XFS mounting filesystem sda1
|
|---|
| 444 | Ending clean XFS mount for filesystem: sda1
|
|---|
| 445 | Adding 979832k swap on /dev/md1. Priority:-1 extents:1 across:979832k
|
|---|
| 446 | skge eth0: enabling interface
|
|---|
| 447 | ADDRCONF(NETDEV_UP): eth0: link is not ready
|
|---|
| 448 | skge eth0: Link is up at 1000 Mbps, full duplex, flow control both
|
|---|
| 449 | ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
|
|---|
| 450 | eth0: no IPv6 routers present
|
|---|
| 451 | Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=345 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=325
|
|---|
| 452 | Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=345 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=325
|
|---|
| 453 | Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=354 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=334
|
|---|
| 454 | Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=354 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=334
|
|---|
| 455 | Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=397 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=377
|
|---|
| 456 | Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=397 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=377
|
|---|
| 457 | Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=425 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=405
|
|---|
| 458 | Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=425 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=405
|
|---|
| 459 | Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=411 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=391
|
|---|
| 460 | Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=409 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=389
|
|---|
| 461 | Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=413 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=393
|
|---|
| 462 | Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=344 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=324
|
|---|
| 463 | Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=353 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=333
|
|---|
| 464 | Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=353 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=333
|
|---|
| 465 | Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=410 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=390
|
|---|
| 466 | Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=353 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=333
|
|---|
| 467 | Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=412 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=392
|
|---|
| 468 | agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
|
|---|
| 469 | agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
|
|---|
| 470 | agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
|
|---|
| 471 | Machine check events logged
|
|---|
| 472 | lgdt330x: lgdt3303_read_snr: Modulation set to unsupported value
|
|---|
| 473 | lgdt330x: lgdt3303_read_snr: Modulation set to unsupported value
|
|---|
| 474 | KERN_WARNING lgdt330x: lgdt3303_read_status: Modulation set to unsupported value
|
|---|
| 475 | lgdt330x: lgdt3303_read_snr: Modulation set to unsupported value
|
|---|
| 476 | lgdt330x: lgdt3303_read_snr: Modulation set to unsupported value
|
|---|
| 477 | KERN_WARNING lgdt330x: lgdt3303_read_status: Modulation set to unsupported value
|
|---|
| 478 | lgdt330x: lgdt3303_read_snr: Modulation set to unsupported value
|
|---|
| 479 | lgdt330x: lgdt3303_read_snr: Modulation set to unsupported value
|
|---|
| 480 | KERN_WARNING lgdt330x: lgdt3303_read_status: Modulation set to unsupported value
|
|---|
| 481 | Machine check events logged
|
|---|
| 482 | Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=345 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=325
|
|---|
| 483 | Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=345 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=325
|
|---|
| 484 | Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=354 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=334
|
|---|
| 485 | Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=354 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=334
|
|---|
| 486 | Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=397 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=377
|
|---|
| 487 | Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=397 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=377
|
|---|
| 488 | Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=425 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=405
|
|---|
| 489 | Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=425 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=405
|
|---|
| 490 | Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=411 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=391
|
|---|
| 491 | Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=409 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=389
|
|---|
| 492 | Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=413 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=393
|
|---|
| 493 | Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=344 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=324
|
|---|
| 494 | Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=344 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=324
|
|---|
| 495 | Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=353 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=333
|
|---|
| 496 | Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=424 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=404
|
|---|
| 497 | Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=353 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=333
|
|---|
| 498 | Outbound IN= OUT=eth0 SRC=192.168.0.11 DST=239.255.255.250 LEN=412 TOS=0x00 PREC=0x00 TTL=4 ID=0 DF PROTO=UDP SPT=1900 DPT=1900 LEN=392
|
|---|
